Add to cart.

May 17, Solid progress is made on the drift e Next episode, SHE RUNSS!!! Follow the socials: @m3jk / @stumpcutting.bar Step 1: After removal and cleaning of the diff bushing lubricate the bushing and diff cover.

The collar on the bushing faces outward on both arms so you should only be pushing towards the center.

Step 2: With the lip facing the rear and the arrow pointing up start to press the bushing by hand, use a rubber mallet if necessary. Step 3: Lubricate the race and the bushing and start to press on the race by hand, use rubber mallet if necessary DisclaimerPrice:Instructions: Differential Off-set Bushing Install. Step 1: After removal and cleaning of the diff bushing lubricate the bushing and diff cover.

Step 2: With the lip facing the rear and the arrow pointing up start to press the bushing by hand, use a rubber mallet if stumpcutting.bar:Jun 25, Support the car on the frames with stands and then place the jack under the diff. Pull the bolt out of the bushing and lower it down so that the bushing clears the bracket. Might have to put a little effort into pulling it down but you should be able to get it to clear. I then used a small jigsaw with a e30 differential bushing removal blade to cut through the metal ring.

Dec 31, With the driveshaft off, dropping the entire rear suspension assembly is pretty straightforward - unbolt the shocks from the trailing arms, disconnect the appropriate brake line(s), use a jack or two and some boards carefully positioned to support everything, and the entire rear subframe/trailing arms/diff will drop right out when you pull a diff-support bolt and the rear-subfram.