Product Number and Product name.
SAFETY FIRST: Always wear safety glasses when cutting the stair treads and any aluminum products. After the QuickStep stair tread is cut, put back the aluminum channels into the slots they were taken out of. Place back the PVC cap into the cut end of the QuickStep stair tread. Aug 02, For starters, to cut a full /2" stair tread, a 12" sliding tree removal noosaville saw is best.
This will allow you to make a full 12" cut in one pass. Using a 10" or smaller saw that doesn't slide means you'll have to make two cuts on each side of the tread and is very difficult to achieve a quality cut. stumpcutting.bar - Click on this link to learn more about nonslip treads and stairway nosing.
This nosing has an integral anchor for installation in fresh concrete stairs; no additional fasteners required.
There are a few things that. 3 rowsStair Tread Covers. Protect stairs from wear or provide a new stair surface on worn stairs. Measure across the front edge of the stair. Remove the aluminum stair edge from the packet. Use a hacksaw to cut it to the measurement.
Use a medium-tooth metal file to smooth and round the fresh. Construction: heat-treated, heavy-duty aluminum (T5) alloy 9/32" thick, engineered and built to out last ordinary treads by many years. Inverted"V" grooves are filled with diamond-hard aluminum oxide grit similar to grinding wheel abrasives. The fact this material is so hard that it cannot be cut with a hacksaw is proof to the product's built-in wear.