Your maple tree should be at least 10 inches in diameter before you tap it.

As others have said yes you can tap in the fall. Any time the temps fall below frezzing and then rise above the sap will flow. However the sugar content will be lower than in the spring time. increase the total sap yields by tapping their trees not only in the spring but also in the fall too. Our research indicates that tapping in the fall cannot be recommended. Figure 1. Typical large, open-grown sugar maple trees like these were used for fall tapping experiments.

Hold the drill and drill bit at a slight angle, pointing upwards.

Can I tap my maple tree? Maple syrup can be made from any species of maple tree. Trees that can be tapped include: sugar, black, red and silver maple and box elder trees.

To tap the tree, drill a hole about into the trunk of the tree, either above a large root or below a large branch on the south side of the tree. Hold the drill and drill bit at a slight angle, pointing upwards. The hole should be about two inches stumpcutting.baron: Poplar Street, Annandale,VA.

The study clearly showed that sap can be obtained from tapped maple trees during the stumpcutting.barr, both the amount and the sugar concentration of this sap were lower than that obtained during the normal spring tapping season. Page 6. Mar 29, Maple trees are easy to identify based on their leaves, but getting a field guide is a good investment.

Who wants to take time tapping the wrong tree? Depending on your area, there are a variety of maple trees you can tap. The most common types are sugar, black, and red maple trees.

I Sugar and black maple trees are the ideal choices for syrup tapping. Red maple trees have a lower sugar content, so you Estimated Reading Time: 7 mins.